Specifications

• Voltage Requirements: 120 VAC
• Power Requirement: 5.1 Amps (full load)
• Circuit Protection: 15 Amp Breaker
• Control Umbilical Connection: 6-pin Amphenol
• Ball Valve: 316 Stainless Steel, 5 Way
• Oven Filters: 3 x 304 Stainless Steel Filter Holder (Glass Fiber Filter Cartridge)
• Probe Filters: 3 x 316 Stainless Steel Frit
• Probe: 12’ x 2" Dia. 304 Stainless Steel
• Probe Length Adjustment: Add Desired Length of 3/8" Stainless Steel Tubing to Each Point
• External Dimensions (h x w x d): 11" x 10 1/4" x 15 1/2" without probe
• Oven Internal Dimensions (h x w x d): 9 1/4" x 8 1/2" x 8 3/4"
• Weight: 34 lbs.

Description

The 3 Point Probe makes CFR Part 60 & Part 75 RATA sampling as easy as 1,2,3. The electrically actuated stainless steel ball valve allows 1of 3 user defined traverse points to be sampled. A calibration gas tee is included on point1. Sample points 1, 2, or 3 can be selected manually at the probe (Local Mode) or from remote dry contacts or data logger (Remote Mode). Built in digital controllers maintain oven and probe at desired temperature. 3 stainless steel fritted filters on the probe and 3 glass fiber filters in the oven keep the sample clean. A strain relief is provided for a steady heated sample line connection.