The 5-Channel Calibrator Includes:

• Flowmeter with stainless steel needle valve.
• 1/4" swagelok female fittings
• AUTO Mode- allows a data acquisition system equipped with a dry-contact closure to control calibration points remotely
• 12V DC output signal for use by control system via an amphenol connector
• Sub-Rack design for standard 19" equipment rack
• Standard Tube-Type Fuse
• Solenoid valves rated at 40 psig

Description:
The 5-Channel Calibrator is designed to interface CEM analyzers with five individual calibration gases. The gases can be controlled manually, or remotely with a computer or data logger through one of two calibration ports.

Stack Tester Comments :
We use the 5-Channel Calibrator to manage the FID cal gas to the probe tip in combination with the FLW-6 for all the other dry gas analyzers. The 5- Channel is also great when we are only running one or two analyzers or when we have many analyzers and don't need all the functions of the FLW-6.

The solenoid values require properly maintained gas cylinder pressure regulators to ensure the gas pressure to the solenoids never exceeds 40 psig. Pressure regulators which cannot control pressure with zero flow should not be used.

Power Requirement:
120V AC and 220V configurations are available.

Approximate Shipping Weight:
One box weighing 6.7 lbs.

Price: $1700.00US
USA List Price Only