Standard Pitot Tube

Standard Pitot Tubes:

• These are our Standard Pitot Tubes

• They are intended for use with clean air or clean gas since the small holes can plug and give erroneous measurements.

• Calibration is normally not done since the calibration does not change unless the pitot is damaged.

Part Number		Length
0301-L		1'
0302-L		2'
0303-L		3'
0304-L		4'
0305-L		5'

Description: These pitots are fabricated of Stainless Steel and have a correction factor of .99. The hose ends are straight 3/16 inch o. d. tube for easy hose slipover.