Description

The Sample Gas Distribution Module is designed to interface CEM analyzers with four individual sample gas streams. A back pressure regulator controls the sample pressure to provide a consistent flow rate to the analyzers. In calibration mode the sample gas is bypassed to the vent and a calibration gas port is routed to the analyzers for internal calibration. The calibration mode can be controlled manually by front panel push button or remotely from your data acquisition system. A sample inlet filter is mounted on the back panel for easy access. The Sample Gas Distribution Module combined with a Calibration Module can make controlling sample and calibration gases to your analyzers as simple and easy as it can be.

Features:

• Flowmeters with stainless steel needle valve provides indication and control of sample gas flow rate from 0 to 1.0 lpm. and a 0-10 lpm. flowmeter for sample vent flow.
• Back Pressure Regulator provides consistent sample flow rates.
• Sample Inlet Filter mounted on back panel for easy access.
• CAL Mode allows a data acquisition system equipped with a dry contact closure to control the calibration port remotely. A status output is also provided when in manual cal mode.
• Sub-Rack Design for installation into a standard 19" instrument rack.