Express Catalog -->SO3 Controlled Condensation System
SO3
Part Number:

No recirculation pump or external water heaters are required.

The CleanAir Express SO3 Controlled Condensation System is designed to allow the separation of H2SO4 from SO2 by cooling the gas stream below the dewpoint of H2SO4 but above the H2O dewpoint. The condenser utilizes a straight quartz tube filled with quartz wool surrounded by a temperature regulated water bath. No recirculation pump or external water heaters are required. The system works in conjunction with Isokinetic Control Consoles and Heater Controllers.

The Controlled Condensation System consist of Part #:

  • 0516P Stainless Steel Heated Probe (600 °F) 6 ft. w/quartz liner
  • 05502 Quartz Glass Probe Liner 18/9 Ball Joint
  • 051621 Heated Filter Box (550 °F)
  • 05503 Quartz Glass Filter Holder 18/9 Ball Joint
  • 05162 Temperature Regulated Water Bath (150 °F) w/quartz condenser tube
  • 05505 Quartz So3 Condenser Tube 18/9 Ball Joint
  • 0554 Quartz 90° Connector

Call for options on any of these additional items you may need:
Filter Media, Filter Holder Springs, Impinger Bucket, Impingers, Impinger Outlet, Glassware,
Glassware Spring Clamp 18/9 Ball joint, Control Umbilical, Modified Isokinetic Control Console,
Condenser Tube Purge Pump, Titration Kit, Meter Box, Pump, and Glassware Shipping Cases available

Specifications
Voltage Requirement: 115 VAC
Power Requirement: Amphenol #1: Probe and Condenser 8 Amps (full load)
Power Requirement: Amphenol #2: Filter Oven 8.6 Amps (full load)
Control Umbilical Connection: 4-pin Amphenol and 3-pin Amphenol
Approximate 2010 Price:
To Order Call: 1-800-223-3977

Or buy online for less here