Method 2 | Method 3 | Method 5 | Method 6 | Method 8A | Method 17 | Method 23 | Method 29| Method 201A/PM10
Boiler/ Combustion Services | Testing Services | Personnel | Equipment | Testing Methods | Training | Safety | Quality | Pollutants
Services and Pricing | On-Site Testing | Quality | Guarantee
Process Consulting | Compliance Consulting | Permitting
Analyzers | Accessories | Gas Analyzers | CEM Equipment | Flow | Gas Conditioning | Heated Sample Lines | Sample Recovery | Source Sampling
On-Line Catalog | Used Equipment Sale | MSDS Database | Credit Application | Rental Terms | Gas Cylinder Database
subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link
subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link

 

Clean Air Equipment Sales (800) 223-3977 small logo

Teflon ® (PTFE) Tubing

Clean Air Express Teflon® Tube:

Clean Air Express Teflon® Tube is available in lengths of up to 200'.

Description: Teflon® tube is flexible and resistant to crimping and blockage. This is the preferred tubing for emissions measurement below 500F. For tube diameters or colors not listed here, please call. Material: Heavy Wall  Polytetrafluoroethylene (PTFE) Teflon® Tube.

  • * Colors stocked are Green, Blue, Red & Yellow. If you need another color or size please call.
  • ** Bend radius is for room temperature bends. Heating tube to soft point prior to bending is best for permanent bends.
  • Continuous lengths over 100 feet ship approximately four weeks after order.
  • For specific properties, see our Summary of Properties.
  • For burst pressure values, see our Theoretical Burst Pressure Chart.

Teflon® is a registered trademark of DuPont. Teflon® is the brand name for the Dupont fluoropolymer plastic resins PTFE, FEP, and PFA. These three are very similar in composition, temperature limit and chemical resistance but have slightly different mechanical properties that make each one better suited for some specific applications.  PTFE is best for most most gas sampling.

Tube OD
Tube ID
Tube Wall
Part Number
Color
Bend Radius **
1/8" OD
1/16"
~0.031
Natural
<0.3"
1/4" OD
1/8"
~0.062
Natural
<0.5"
1/4" OD
1/8"
~0.062
Specify *
<0.5"
3/8" OD
1/4"
~0.062
Natural
~1"
1/2" OD
3/8"
~0.062
Natural
~2"
5/8" OD
1/2"
~0.062
Natural
~4"
Air Testing | Analytical | Consulting | Express Sales | Rentals | Contact Us | ©2008 Clean Air Engineering