Overview
Services and Prices
On-Site Testing
Contact
Information |
|
|
Complete
Price List
This
is only a pricing list for laboratory work performed at Clean Air
Analytical Services. For details go to Services
and Prices page:
Organic
Compound Analysis
| |
First Compound
|
Each Additional Compound
|
|
Adsorbent Tube
|
$125/sample
|
$60/sample
|
|
Impinger Catch
|
$125/sample
|
$60/sample
|
|
Tedlar Bag
|
$125/sample
|
$60/sample
|
BACK
Coating
and Ink Analysis
|
EPA Method 24
|
$390/sample
|
|
EPA Method 204a
|
$250/sample
minimum $1,500 or six samples
|
EPA Method 204f
for distillate generation
|
$100/sample
for response factor see M204a
|
|
Ten or More Samples
|
10% Discount on Analysis
|
|
Twenty or More Samples
|
25% Discount on Analysis
|
Inorganic
Analysis
For all inorganic analysis there is a minimum of $400 per project
or eight samples
Sample not provided in a water matrix will be assessed an extra
$150 per sample charge for evaporation and reconstitution in water
matrix.
|
Ion Chromatography - Cations
|
|
Lithium:
|
$50/sample
|
|
Sodium:
|
$50/sample
|
|
Potassium:
|
$50/sample
|
|
Ammonium:
|
$50/sample
|
|
Magnesium:
|
$50/sample
|
|
Calcium:
|
$50/sample
|
|
Ion Chromatography - Anions
|
|
Fluoride:
|
$50/sample
|
|
Chloride:
|
$50/sample
|
|
Nitrite:
|
$50/sample
|
|
Bromide:
|
$50/sample
|
|
Nitrate:
|
$50/sample
|
|
Phosphate:
|
$50/sample
|
|
Sulfate:
|
$50/sample
|
|
Ion Chromatography - Carbonate
|
|
Carbonate:
|
$50/sample
|
| Formate: |
$50/sample |
| Acetate: |
$50/sample |
| Propionate: |
$50/sample |
| Sulfate: |
$50/sample |
|
Titration Analysis
|
|
Sulfur Dioxide (Method 6):
|
$40/sample
|
|
Sulfuric Acid Mist (Method 8):
|
$40/sample
|
Gravimetric Analysis
Gravimetrics - Method 5, Method 17,
CARB Method 5
|
Front-Half Analysis
|
|
Filter:
|
$30/sample
|
|
Probe Wash:
|
$30/sample
|
|
Back-Half Condensable
|
|
Gravimetric analysis of aqueous condensable
(inorganic):
|
$50/sample
|
|
Organic solvent extractable residue:
|
$50/sample
|
|
Back half acetone organic rinse (if required):
|
$30/sample
|
|
Back half filtration analysis:
|
$40/sample
|
Ion Chromatography (eg sulfate) will be charged in accordance with
the Ion Chromatography Fee Schedule
Gravimetrics
- Road Silt Determinations
|
"Procedures
for Sampling Surface/Bulk Materials"
|
$100/sample
|
Gravimetrics - Tared Filter Media
or see Untared
Filter Media
|
8.26 cm Diameter Filters
|
|
934 AH Glass Fiber
|
$25 each
|
|
QAT UP Quartz Fiber
|
$30 each
|
| Teflon Filter |
$30 each |
|
4.7 cm Diameter Filters
|
|
934 AH Glass Fiber (double w/ gaskets)
|
$25 each
|
|
QAT UP Quartz Fiber
|
$30 each
|
|
8" x 10" (Hi-Vol
Filters)
|
|
934 AH Glass Fiber
|
$30 each
|
|
Quat UP Quartz Fiber
|
$35 each
|
|
M17 Alundum Thimbles
|
$100 each |
|
37mm Acetate Membrane Cassette Filter
|
$25 each |
|
Post Weights
|
| Filters |
$15 each |
| Acetone and DI H2O Rinses |
$30 each |
| MeCl Extract |
$50 eaach |
Laboratory
Resistivity Determinations
|
IEEE Standard 548-1984
|
|
Round
Trip - Resistivity measured as a function of ascending
and descending test temperature between 85°C
and 450°C in an environment of air containing one specified
water concentration at an average electric field intensity
of 4kV/cm
|
$1,045
sample
|
| |
|
Ascending temperatures only; otherwise same
as round trip:
|
$925
sample
|
| |
|
Descending temperatures only; otherwise same
as round trip:
|
$660
sample
|
| |
|
Descending temperatures with one ascending
data point at the temperature of principal interest; otherwise
same as round trip:
|
$760
sample
|
| |
|
Resistivity as a function of applied electric
field at a specified temperature:
|
$710
sample
|
|
With Sulfuric Acid or Ammonia Environment;
EPA Report 600/7-78-035
|
|
Single point determination - Resistivity measured
isothermally as a function of electric field intensity in
an environment of air containing a specified concentration
of water and sulfuric acid or ammonia vapor (48 hour test)
|
$1,045
sample
|
| |
|
Each additional data point produced by changing
temperature, water concentration, sulfuric acid vapor concentration
or ammonia vapor concentration (24 hour test):
|
$660
sample
|
Computer Model Resistivity Predictions
|
Resistivity predicted as a function of temperature
and environmental conditions (water and sulfuric acid concentration)
using customer-supplied coal and ash compositional data. Model
II described in EPA-600/7-86-010 is used; with brief comment
|
$250/sample
|
|
Predicted inherent and sodium-depleted volume
resistivity using customer-supplied ash compositional data.
Described in EPRI Report CS-3421; with brief comment:
|
$250/sample
|
Particle
Characterization
|
Laboratory Resistivity
Determination and Prediction
|
See
Details
|
|
Ash mineral analysis and loss-on-ignition
(LOI)
|
$375/sample
|
|
Short proximate, ultimate coal analysis
|
$210/sample
|
|
Soluble sulfate analysis on ash
|
$55/sample
|
| Computer
Model ESP Performance,Scanning electron microscopy (SEM), x-ray
diffraction, designed resistivity tests, and consultation work |
Priced
according to scope and complexity |
BACK
Spectroscopy
Fourier
Transform Infrared (FTIR) Spectroscopy
| FTIR Analysis |
Call for Pricing |
Photospectroscopy
| Photospectroscopy Analysis |
Call for Pricing |
BACK
Rush Analysis Pricing
Analytical results will be issued 15 working days from the receipt
of samples. Rush analytical results may be available at increased
rates upon request. Rush charges for analysis will be applied in the
following manner:
|
1-2 working days
|
300%
of listed price - Guaranteed start of analysis on day of
sample receipt
|
|
3-5 working days
|
200%
of listed price - Within three days of sample receipt
|
|
6-10 working days
|
150%
of listed price - Within six days of sample receipt
|
In any circumstance, a purchaser's request for rush analysis in
a certain time frame authorizes all degrees of rush charges up to
that extent. Rush charges on the final invoice will be reflective
of when results were available and reported to the Purchaser. All
days will be calculated on a five day work week (with allowance
for holidays).
How to Avoid Rush Charges
To avoid rush charges but still receive results in a short
turnaround period, contact Clean Air
Analytical Services
before your samples are taken or ready to be shipped. Upon CleanAir's
receipt of a purchase order and a date of the samples arrival,
the standard 15 day turnaround period begins. For example, if
we received the purchase order today, and the samples were to
arrive at CleanAir in two weeks, the analysis would be completed
one week after the samples arrived. If the samples do not arrive
on the day the client initially states, the turnaround time is
delayed by the same amount and rush charges may still be applied.
NOTE: Rush charges do not apply to tared
filter media.
All analyses will be performed
according to Clean Air Engineering's
Terms and Conditions for Laboratory Work.
|
