Web Analytics

Custom Made to Order Heated Sample Line

Custom Made to Order Heated Sample Line

$1,024.00$6,745.92

Clear

No additional documents available for this product

Made to Order Custom Heated Sample Lines

Heated Sample Line with Temperature ControllerCleanAir Express heated sample lines feature an electrically heat traced and insulated 3/8″ Teflon ® PTFE (.030 Wall) sample line with a stainless steel over braid and stainless steel tube ends, a 1/4 Teflon ® PTFE (.040 wall) calibration line, 3 pin Amphenol power connector, and 2 type K thermocouple plugs. Protected by a durable scuff resistant extruded polyurethane jacket. *Temperature controller sold separately. *Heated Sample Lines are not self limiting; a temperature controller is required. Custom lengths, voltage, and configuration available*Heavy Duty Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at -20°F ambient temperature.

Options:

 

  • Hazardous Certification
  • CSA Certification
  • Additional unheated tube (.062 wall PTFE): 1/2″, 3/8” , 1/4″
  • Additional 12 ga power line
  • Additional shielded K T/C messenger wire
  • Additional for 2nd heated tube

For lengths over 100′, please call for more information.

Part Number
Item
Custom HSL
Custom Heated Sample lines from 1-100 Ft.
Universal Temperature Controller

Heated Sample Lines are used with:

Heavy Duty versus Standard Heated Sample Line

      • Note: Heavy Duty Heated Sample Lines HD are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of -20°F.
      • Note: Standard Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of 0°F.

Heated Sample Line Features:

  • Rated for 400 º F continuous operation at -20 º F ambient temperature
  • Triple insulation maintains temperature of line with less power consumption. (Heavy Duty)
  • Lower resistance heaters requires less power to heat lines.
  • A backup type K thermocouple to prevent project delays in the case of primary thermocouple failure in the field.
  • Stainless steel over braid and stainless steel tube ends for the sample line to prevent abrasive failure in the field. Optional stainless steel over braid for protection of calibration line from abrasive failure in the field.
  • Durable extruded poly-urethane jacket for protection of sample/calibration lines from abrasive failure in the field.
  • Inert Teflon® PTFE sample and calibration lines provide more accurate results by eliminating potential bias from other materials. PTFE is also more corrosion resistant than tygon, and can be washed with acetone without degradation.
Weight11.339809 kg
Dimensions22 × 22 × 4 cm
Voltage

120 Vac, 240 Vac

Length Range

1-10 Ft., 11-20 Ft., 21-30 Ft., 31-40 Ft., 41-50 Ft., 51-60 Ft., 61-70 Ft., 71-80 Ft., 81-90 Ft., 91-100 Ft.

Power/Messenger Line

Additional 12 ga. Power Line, Additional Shielded K T/C Messenger Wire, Additional Shielded K T/C Messenger Wire and 12 ga. Power Line, None

Unheated Tube Option

Additional 1/2" .062 wall PTFE Unheated Tube, Additional 1/4" .062 wall PTFE Unheated Tube, Additional 3/8" .062 wall PTFE Unheated Tube, None

Reviews

There are no reviews yet.

Be the first to review “Custom Made to Order Heated Sample Line”

Your email address will not be published. Required fields are marked *