Web Analytics

CleanAir CEM Heated 3-Point Probe

CleanAir CEM Heated 3-Point Probe


The CEM Heated 3-Point Rata Probe makes CFR Part 60 sampling easy. The electrically-actuated stainless steel ball valve allows 1 of 3 user-defined traverse points to be sampled. A calibration gas tee is included on point 1. Sample Points 1, 2, or 3 can be selected manually at the probe (Local Mode) or from remote dry contracts or data logger (Remote Mode). Built-In digital controllers maintain oven and probe at desired temperature. Three stainless steel fritted filters on the probe and three glass fiber filters in the oven keep the sample clean. A strain relief is provided for a steady heated sample line connection.

Part Number
 073123 120 Vac CEM Heated 3 Point Rata Probe
Remote Manual Switch Box for 3 Point Rata Probe

CEM Heated 3 Point Rata Probe Specifications:

  • Voltage Requirements: 120VAC
  • Power Requirements: 5.1 Amps (full load)
  • Circuit Protection: 15 Amp Breaker
  • Control Umbilical Connection: 6-pin Amphenol
  • Ball Valve: 316 Stainless Steel, 5 Way
  • Oven Filters: 3 x 304 Stainless Steel Filter Holders
  • Probe Filters: 3 x 316 Stainless Steel Frit
  • Probe: 24″ x 2″ Dia. 304 Stainless Steel
  • Probe Lengths Adjustment: Add Desired Length of 3/8″ Stainless Steel Tubing to Each Point
  • Oven Internal Dimensions (h x w x d): 9.25″ x 8.5″ x 8.75″
  • Weight: 34 lbs.

Remote Manual Switch Box for 3 Point Rata Probe

  • Power Connection: Six feet 120VAC Power Cord
  • Communication Connection: Female Six-Pin Amphenol Connection
  • Channels: 5 Position Rotary Switch (1, 2, 3, N, and Off)

No additional documents available for this product